MOBILE
|
|
Mobile module
|
4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps |
SIM switch
|
2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection |
Status
|
Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID |
Bridge
|
Direct connection (bridge) between mobile ISP and device on LAN |
Passthrough
|
Router assigns its mobile WAN IP address to another device on LAN |
APN
|
Auto APN |
SMS
|
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP |
Black/White list
|
Operator black/white list |
Multiple PDN (optional)
|
Possibility to use different PDNs for multiple network access and services |
Band management
|
Band lock, Used band status display |
USSD
|
Supports sending and reading Unstructured Supplementary Service Data messages |
WIRELESS
|
|
Wireless mode
|
IEEE 802.11b/g/n, Access Point (AP), Station (STA) |
WiFi security
|
WPA-PSK/WPA2-PSK Mixed Mode, WPA2-PSK, WPA2-EAP, WPA2-EAP/WPA3-EAP Mixed Mode, WPA3-EAP, WPA2-PSK/WPA3-SAE Mixed Mode, WPA3-SAE, OWE; AES-CCMP, TKIP, Auto Cipher modes, client separation |
SSID/ESSID
|
SSID stealth mode and access control based on MAC address |
WiFi users
|
Up to 100 simultaneous connections |
Wireless Hotspot
|
Captive portal (Hotspot), internal/external Radius server, built in customizable landing page |
ETHERNET
|
|
WAN
|
1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX |
LAN
|
3 x LAN ports, 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX |
NETWORK
|
|
Routing
|
Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, NHRP) |
Network protocols
|
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL) |
VoIP passthrough support
|
H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets |
Connection monitoring
|
Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection |
Firewall
|
Port forward, traffic rules, custom rules |
DHCP
|
Static and dynamic IP allocation, DHCP Relay |
QoS / Smart Queue Management (SQM)
|
Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e |
DDNS
|
Supported >25 service providers, others can be configured manually |
Network backup
|
WiFi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover |
Load balancing
|
Balance your internet traffic over multiple WAN connections |
Hotspot
|
Internal/external Radius server, captive portal, built in customizable landing page |
SSHFS
|
Possibility to mount remote file system via SSH protocol (not available in standard FW) |
SECURITY
|
|
Authentication
|
Pre-shared key, digital certificates, X.509 certificates |
Firewall
|
Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T |
Attack prevention
|
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) |
WiFi security
|
WPA-PSK/WPA2-PSK Mixed Mode, WPA2-PSK, WPA2-EAP, WPA2-EAP/WPA3-EAP Mixed Mode, WPA3-EAP, WPA2-PSK/WPA3-SAE Mixed Mode, WPA3-SAE, OWE; AES-CCMP, TKIP, Auto Cipher modes, client separation |
VLAN
|
Port based and tag based VLAN separation |
Mobile quota control
|
Set up custom data limits for both SIM cards |
WEB filter
|
Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only |
Access control
|
Flexible access control of TCP, UDP, ICMP packets, MAC address filter |
VPN
|
|
OpenVPN
|
Multiple clients and server can be running simultaneously, 12 encryption methods |
OpenVPN Encryption
|
DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC |
IPsec
|
IKEv1, IKEv2, supports up to 4 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256) |
GRE
|
GRE tunnel |
PPTP, L2TP
|
Client/Server instances can run simultaneously, L2TPv3 support |
Stunnel
|
Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs' code |
SSTP
|
SSTP client instance support |
ZeroTier
|
ZeroTier VPN |
DMVPN
|
Method of building scalable IPsec VPNs |
WireGuard
|
WireGuard VPN client and server support |
MODBUS
|
|
MODBUS TCP SLAVE
|
|
ID range
|
Respond to one ID in range [1;255] or any |
Allow Remote Access
|
Allow access through WAN |
Custom registers
|
Modbus TCP custom register block requests, which read/write to a file inside the router, and can be used to extend Modbus TCP Slave functionality |
MODBUS TCP MASTER
|
|
Supported functions
|
01, 02, 03, 04, 05, 06, 15, 16 |
Supported data formats
|
8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC) |
MODBUS DATA TO SERVER
|
|
Protocol
|
HTTP(S), MQTT, Azure MQTT |
MQTT GATEWAY
|
|
MQTT gateway
|
Allows sending commands and receiving data from Modbus Master through MQTT broker |
DNP3
|
|
Supported modes
|
TCP Master, DNP3 Outstation |
MONITORING & MANAGEMENT
|
|
WEB UI
|
HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log |
FOTA
|
Firmware update from server, automatic notification |
SSH
|
SSH (v1, v2) |
SMS
|
SMS status, SMS configuration, send/read SMS via HTTP POST/GET |
Call
|
Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, WiFi on/off |
TR-069
|
OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem |
MQTT
|
MQTT Broker, MQTT publisher |
SNMP
|
SNMP (v1, v2, v3), SNMP trap |
JSON-RPC
|
Management API over HTTP/HTTPS |
MODBUS
|
MODBUS TCP status/control |
RMS
|
Teltonika Remote Management System (RMS) |
IoT PLATFORMS
|
|
Cloud of Things
|
Allows monitoring of: Device data, Mobile data, Network info, Availability |
ThingWorx
|
Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type |
Cumulocity
|
Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength |
Azure IoT Hub
|
Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server |
SYSTEM CHARACTERISTICS
|
|
CPU
|
Mediatek MIPS 24Kc 580 MHz |
RAM
|
128 MB, DDR2 |
FLASH memory
|
16 MB SPI Flash |
FIRMWARE / CONFIGURATION
|
|
WEB UI
|
Update FW from file, check FW on server, configuration profiles, configuration backup |
FOTA
|
Update FW |
RMS
|
Update FW/configuration for multiple devices |
Keep settings
|
Update FW without losing current configuration |
FIRMWARE CUSTOMIZATION
|
|
Operating system
|
RutOS (OpenWrt based Linux OS) |
Supported languages
|
Busybox shell, Lua, C, C++ |
Development tools
|
SDK package with build environment provided |
INPUT/OUTPUT
|
|
Input
|
1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high |
Output
|
1 x Digital Output, Open collector output, max output 30 V, 300 mA |
Events
|
SMS, EMAIL, RMS |
POWER
|
|
Connector
|
4 pin industrial DC power socket |
Input voltage range
|
9 – 30 VDC (4 pin industrial socket), reverse polarity protection; surge protection >31 VDC 10us max |
PoE (passive)
|
Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, LAN1 Port, 9 - 50 VDC |
Power consumption
|
< 2 W idle, < 7 W Max |
PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)
|
|
Ethernet
|
4 x RJ45 ports, 10/100 Mbps |
I/O’s
|
1 x Digital Input, 1 x Digital Output on 4-pin power connector |
Status LEDs
|
1 x bi-color connection status LED, 5 x connection strength LEDs, 4 x LAN status LEDs, 1 x Power LED |
SIM
|
2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders, eSIM (Optional) |
Power
|
1 x 4-pin power connector |
I/O juggler
|
Allows to set certain I/O conditions to initiate event |
Antennas
|
2 x SMA for LTE, 2 x RP-SMA for WiFi antenna connectors |
Reset
|
Reboot/User default reset/Factory reset button |
PHYSICAL SPECIFICATION
|
|
Casing material
|
Aluminium housing, plastic panels |
Dimensions
|
110 x 50 x 100 mm (W x H x D) |
Weight
|
297 g |
Mounting options
|
DIN rail (can be mounted on two sides), flat surface placement |
OPERATING ENVIRONMENT
|
|
Operating temperature
|
-40 °C to 75 °C |
Operating humidity
|
10% to 90% non-condensing |
Ingress Protection Rating
|
IP30 |
MTBF
|
270000 h |
REGULATORY & TYPE APPROVALS
|
|
Regulatory
|
CE/RED, UKCA, EAC, UCRF |
Operator
|
AT&T, Verizon |
EMI IMMUNITY
|
|
Standards
|
EN 301 489-1 V2.2.3, Draft EN 301 489-17 V3.2.5, EN 301 489-52 V1.2.1, EN 55032:2015+A1:2020, EN 55035:2017+A11:2020 |
ESD
|
EN61000-4-2:2009 |
RS
|
EN61000-4-2:2009 |
EFT
|
EN 61000-4-4:2012 |
Surge protection
|
EN 61000-4-5:2014+A1:2017 |
CS
|
EN 61000-4-6:2014 |
DIP
|
EN IEC 61000-4-11:2020 |
RF
|
|
Standards
|
EN 300 328 V2.1.1, EN 301 511 V12.5.1, EN 301 908-1 V11.1.1, EN 301 908-2 V11.1.1, EN 301 908-13 V11.1.1 AS/CA S042.1:2018, AS/ACIF S042.3:2005, AS/CA S042.4:2018, AS/NZS 4268:2017 FCC 47 CFR Part 15C, FCC 47 CFR Part 22H, FCC 47 CFR Part 24E, FCC 47 CFR Part 27 |
SAFETY
|
|
Standards
|
EN IEC 62311:2020, EN 50665:2017 |